Fuel Cell Foam - Set of 6

Description

Minimize fuel slosh and unpredictable weight transfer by using this foam in your fuel cell, Compatible with gasoline, E85 and methanol fuels, 97% void rate open cell foam means you will only lose 3% fuel capacity if your cell is filled with foam, These foam blocks are easy to install in most fuel tanks and can be inserted through the main fill cap hole, These 14" x 4" x 6" blocks are sold in a set of 6
Fuel Cell Anti-Slosh Safety Foam Tank Baffle Inserts 14x4x6, 6/pk
Sku # 9107903
Mfr. Part # 9107903
Condition
New
Brand
Speedway Motors
Sold
Set
Details
Info
Prevent fuel sloshing and keep the car handling predictably with our Fuel Cell Tank Safety Foam Blocks. When undergoing cornering or hard acceleration and braking, fuel sloshing about in the tank produces unpredictable weight transfer and may adversely affect your handling. Our fuel cell foam blocks keep weight transfer to a minimum, with just a minimal loss in fuel capacity.
Our fuel cell foam blocks have a 97% void rate, meaning a tank
full
of foam still holds 97% of the original tank’s capacity (a 22 gallon tank full of foam X 0.97 = 21.24 gallons). These safety foam blocks are easy to install in most fuel tanks and can be inserted through the main fill cap hole (you may have to take the top/fill cap plate off to make it easier). Each block is 14” x 6” x 4”. You can cut and stack to fit as needed.
Compatible with pump gas, E85 and alcohol fuels such as methanol and ethanol.
They are not recommended for nitro-methane or diesel fuel
.
Features
Minimizes fuel sloshing during cornering, acceleration and braking
Prevents unexpected handling effects caused by weight transfer of sloshing fuel
97% void rate means a minimal loss in fuel capacity (tank full of foam still holds 97% of original capacity)
Use pump gas, E85, methanol, ethanol or alcohol-based fuels (Not recommended for diesel & nitro-methane)
Easy to install through fuel cap hole
Cut to fit and stack as needed Each block is 14” x 6” x 4”
8-12 gallon cells typically use 3-8 sticks
16 gallon cells typically use 4-10 sticks
22-32 gallon cells typically use 8-14 sticks
Sold as a set of 6 blocks
For off road/aftermarket racing fuel cell use only – not intended for street applications / original equipment fuel tank usage
Specs
Sold in Quantity
Set
Overall Height
6
Overall Width
4
Overall Length
14
Notes
Not recommended for diesel or nitromethane.
Reviews
Would purchase again
Rated
by Dave on December 13, 2021
Summary:
Used this to replace foam that was deteriorating easier to put in then taking out the old stuff
Yes, I recommend this product.
I would buy things I need again and again
Rated
by Bajaracer on September 29, 2021
Summary:
You actually had what I wanted and at a good price
Yes, I recommend this product.
Worked as advertised
Rated
by Flaharleyguy on July 29, 2021
Summary:
Fit in my fuel cell
Yes, I recommend this product.
Great deal. Size fits my 18 gal custom fuel cell perfect.
Rated
by Mazda 55 on June 15, 2021
Summary:
Race car fuel cell and pump gas compatible.
Yes, I recommend this product.
Great product
Rated
by One Idiot of Two Idiot's and a Garage on November 19, 2020
Summary:
Fast delivery and as ordered. Would like another sticker or two for my ChampCar Endurance Series car though.
Yes, I recommend this product.
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.